Planet Technology Internet Camera ICA-110W - Manual (Page 19)

Connecting the Ethernet cable
Connect an Ethernet cable to
the network cable connector
located on the ICA-110/ICA-
110W’s rear panel, and then
attach it to the network.
Attaching the Power Supply
Attach the external power
supply to the DC power input
connector located on ICA-
110/ICA-110W’s rear panel,
and then connect it to your local
power supply.
TIP: You can confirm power source is supplied from the LED
indicators label Power on the ICA-110/ICA-110W is
illuminated.
19