Philips LX3600 - Manual (Page 24)

24
English
3139 115 22851
Auto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
button within 30 minutes after a disc has
stopped playing.
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
To select a playback feature or item
● Use the 1 2 3 4 or numeric keypad
(0-9) on the remote, then press B or
OK to start playback.
To access or remove the menu
● Press DISC MENU on the remote.
Disc Operations
Basic playback controls
Unless stated, all operations described
are based on Remote Control control
use. Some operations can be carried out
using the DVD System Menu.
Pausing playback
1
During playback, press Å.
➜ Playback will pause and sound will be
muted.
2
Press Å again to select the next picture
frame.
3
To return to normal playback, press B.
Searching backward/forward
● Press and hold S / T , then press B
to resume normal playback.
➜ While searching, pressing S / T
again will decrease/increase the search
speed.
MUTE
● Press the MUTE repeatedly to disable
and enable the sound output.
Stopping playback
● Press Ç .
Resuming playback from the last
stopped point (DVD/VCD)
Resume playback of the last 10 discs is
possible, even if the disc was ejected or
the power switched off.
1
Load one of the last 10 discs.
➜ “ LOADING ” appears.
2
Press B and the disc will be played back
from the last stop point.
To cancel the resume mode
● In stop mode, press Ç again.
Helpful Hint:
– Resume option may not be available on
some discs.
001-046_LX36_17_Eng 29/08/2003, 2:45 PM 24