Philips LX3600 - Manual (Page 14)

14
English
3139 115 22851
Connections
IMPORTANT!
–
S-Video connection provides
better picture quality. This option
must be available on your TV.
Using S-Video jack
1
Use the S-video cable (not supplied) to
connect the DVD system’s S-VIDEO
OUT jack to the S-Video input jack (or
labeled as Y/C or S-VHS) on the TV.
2
To hear the TV channels through this
DVD system, use the audio cables (white /
red) to connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the
TV.
REAR
LEFT
SUB-
W
TV IN LINE-OUT
AUDIO
S-VIDEO AUX-IN
L
R
VIDEO OUT
Y
Pb Pr
CVBS
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO OUT Pr/Cr Pb/Cb Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
2 1
IMPORTANT!
–
If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1
Use the composite video cable (yellow)
to connect the DVD system’s CVBS jack
to the video input jack on the RF
modulator.
2
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
NT
HT
CENTER FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUB-
W
SPEAKERS (4 )
TV IN LINE-OUT
AUDIO
S-VIDEO AUX-IN
L
R
VIDEO OUT
Y
Pb Pr
CVBS
AUDIO IN
R L VIDEO
IN
TO TV INT IN
CH3 CH4
2
1
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
001-046_LX36_17_Eng 29/08/2003, 2:44 PM 14