Inputting the distance to be corrected, Audio adjustment
Page 28

Audio Adjustment

Inputting the Distance to be Corrected (Delay Time)

Scope of adjustment: 0 — 340.0 cm (1.7 cm/1 step)

Note:

• The correct distance can not be input unless these operations are conducted.

S.W. (ultrabass-range)

Ô LOW (low-range) Ô MID (mid-range) Ô HIGH (high-

range)

5. Press FUNCTION buttons 1 or 2

and select the band to input.

Each press of the FUNCTION buttons
1 or 2 select the desired band in the
following order:

4. Press FUNCTION buttons 3 or 4

and select the speaker channel to
input.

Press the buttons to switch between left
(LEFT) and right (RIGHT).

3. Press the FUNCTION button 5

and select the driver’s seat (posi-
tion).

Press the buttons to switch between
“FRONT-R” and “FRONT-L”. Select
the position when measuring the
distance to be corrected as shown on
the page 26.

2. Press the FUNCTION button 2.

The display switches to Time Alignment Adjustment Screen, allowing time alignment
adjustment.

1. Open the cover of the remote controller in the Network Menu (refer to

page 4).

This switches to Network Menu Setting Screen.

Page 28