Panasonic AW-E560 - Manual (Page 45)

NO.1 USER A * 0DB
(.35-.55) CURR NEW
*GAMMA(NOR) .45 .45
*GAMMA(SHT) .45 .45
KNEE POINT 98 98%
WHITE CLIP 110 110%
*H.DTL LEVEL H 31 31
*V.DTL LEVEL H 31 31
*H.DTL LEVEL L 15 15
*V.DTL LEVEL L 15 15
RET END
NO.1 USER A * 0DB
(.35-.55) CURR NEW
*GAMMA(NOR) .45 .45
*GAMMA(SHT) .45 .45
KNEE POINT 98 98%
WHITE CLIP 110 110%
*H.DTL LEVEL H 31 31
*V.DTL LEVEL H 31 31
*H.DTL LEVEL L 15 15
*V.DTL LEVEL L 15 15
RET
-43-
USER SETUP MENU SETTING
■ Scene File Memory
The AW-E560 has five scene file memories, of which three
are preset before shipment from the factory. When the
scene file menu mode is set to [1], [2], or [3], the camera
operates under the preset conditions.
The remaining two, USER A and USER B, can be set as
desired.
Each mode is provided with five scene files.
■ User Setting
(1) Display the SETUP menu.
(2) Select the USER A or USER B of scene file from the
SETUP menu.
(3) Move the cursor to USER, and press the page switch.
The camera is now in the user set state, and the USER
set screen appears on the monitor.
User set operation can be performed at the camera
head or RCU (RCB).
■ User Set Screens
∗ Data of those items marked "*" can be stored in the memory at each of the gain levels (0, 9, 18 dB).
#0
#1
#2
#3