Philips DC290/93 - Manual (Page 13)

13
All available stations are programmed
»
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press SET TIME/PROG to activate the
program mode.
3
Press / to select a number.
4
Press SET TIME/PROG to confirm.
5
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1
Press / to select a preset number.
5 Listen to radio
Note
Only FM radio reception is available on this •
unit.
Tune to a radio station
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
Note
For optimal reception, fully extend and adjust •
the position of the antenna.
1
Press TUNER to select FM tuner.
2
Press and hold / for more than 2
seconds.
[Srch] (search) is displayed.
»
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/ repeatedly until you find
optimal reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
[AUTO] (auto) is displayed.
»
English
EN