Philips DC290/93 - Manual (Page 12)

12
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
the • MP3 LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external
•
device.
3
Start to play the device (see the device
user manual). 3
Press iPhone/iPod to select iPod/iPhone
source.
The connected iPod/iPhone plays
»
automatically.
To pause/resume play, press • OK/ .
To skip to a track, press • / .
To search during play, press and •
hold / , then release to resume
normal play.
To go back to the previous iPod/
•
iPhone menu, press MENU. To scroll
through the menu, press / . To
confirm a selection, press OK/
.
If no key is pressed for more than
»
10 seconds, OK/ acts back as
the play/pause key.
Charge the iPod/iPhone
When the unit is connected to power, the
docked iPod/iPhone begins to charge.
Tip
For certain iPod models, it may take up to a •
minute before the charging indication appears.
EN