Philips HTS5506/F8 - Manual (Page 17)

EN - 17
EN
„ Standard Video Connection (Supports only 480i resolution.)
• Connect this unit directly to the TV. If the video cables are connected to a VCR then the pictures may be distorted due
to the copyright protection system.
4.3. Connecting Speakers and Subwoofer
1. Connect the speaker cables to the matching color sockets on the speakers.
2. Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit.
Make sure that the colors of the cables and sockets match.
D Note
•
To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV or
any other radiation sources.
4.4. Connect a Wireless Module
D Note
•
When you connect and switch on the wireless module, the rear surround sound is output through the connectors on
the wireless receiver.
• Please turn off the unit when you connect or disconnect the wireless module.
• When using the wireless module, please disconnect the rear speakers from the rear speaker connectors.
VIDEO IN
Your TV
Video cable
(supplied)
FRONT
LEFT
FRONT
RIGHT
FRONT CENTER REAR LEFT REAR RIGHT SUBWOOFER
Wireless rear audio input
Wireless module (not supplied) - Philips RWSS5510/F7