Peavey S-14 - Manual (Page 10)

10
23
26. VOCAL ENHANCE: The circuitry of the vocal enhance has been designed to improve clarity and definition.
The frequencies have been chosen to work well with speech and singing. The amount is determined by a
concealed preset switch (MIN up, MAX down).
27. MONITOR CLIP/MUTE: Mutes the monitor output. The indicator will light when it is muted. The light also
cautions that the monitor signal is within 2 dB of clipping, and channel send levels or the master monitor fader
level should be reduced.
24 25
26
28. MONITOR MASTER FADER: Sets the
overall level of the signal that is sent to the
monitor output jacks. The headphone/meter
select switch can be used to check the output
level with the meter array.
29. MAIN LEFT AND RIGHT FADERS: These
are the master left and right faders. If the main
outputs are set to dual mono, both have the
same signal (sum of left and right) and can be
used as zone outputs for house and annex
levels etc. These controls are best operated at
the 0 (full up) position. It is most important that
they be at 0 when channel gains are set,
however they can be used to lower the overall
sound level if needed.
30. CONFIGURATION: The main
outputs can be configured as full stereo
or as a mono sum of the left and right
signals. When in dual mono mode, the
left and right outputs become individual
outputs, with their levels set
independently by their master faders.
27 30
28
29