Pioneer DV-79AVi - Manual (Page 31)

Getting Started 04
31
En
Chapter 4
Getting Started
Switching on
After making sure that everything is
connected properly and that the player is
plugged in, press
POWER to switch the player
on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
• You can also use the the STANDBY/
ON button on the remote control to
switch the power on.
• When the player is in standby, you can
use the OPEN/CLOSE and (play)
buttons to switch the player on and open
the disc tray/start playing a loaded disc.
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the correct
video input (not a TV channel). For
example, if you connected this player to
the
VIDEO 1 inputs on your TV, switch
your TV to VIDEO 1 .
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
• This player features a screen saver. When
on, If the player is stopped or paused and
no button is pressed for five minutes, the
screen saver starts. See
Screen Saver on
page 67 for how to switch it on.
POWER
DV-79AVi.book Page 31 Tuesday, August 2, 2005 4:48 PM