Psion Teklogix netpad Win CE 4.1 - Manual (Page 25)

Psion Teklogix netpad Win CE 4.1 User Manual 5
Chapter 1: Introduction
Caring For The netpad
• Drag and drop files between the netpad and the PC in the same way that
you would between PC drives, and they will be automatically converted to
the appropriate file format at the same time.
•
Synchronize e-mail and your address book on the netpad with the PC to
keep them in step with each other.
•
Back up your netpad files to the PC, then restore them from the PC to the
netpad again, if needed.
For detailed information, please refer to Chapter 6: “Connecting netpad To A PC”.
1.4 Caring For The netpad
Screen
When used with the approved stylus, the netpad screen is very resistant to wear and
impact and should last for a considerable time. Use of any object, other than the
approved stylus, may result in damage to the netpad screen.
To maintain the life of the netpad screen, keep the screen clean. To clean the screen:
switch off the netpad and use a soft, clean, dry cloth to gently wipe the screen. (If the
netpad is set to turn on automatically when the screen is tapped, you should turn this
preference off before cleaning the screen.)
Warning: Under no circumstances use chemical solvents to clean the screen.
Charging
To avoid damage to the netpad or the netpad battery packs, use only Psion Teklogix
approved chargers and docking stations.
Backup Battery
The netpad has a rechargeable backup battery designed to retain data while the main
battery pack is charging or changed over.
The backup battery is trickle charged from the main battery pack and has a limited
lifespan. To maximize the life of the backup battery, avoid excessive discharging and
recharging of the backup battery by keeping the netpad battery pack fully charged.
Important: It both the main battery pack and the backup battery are allowed
to fully discharge, all user data held in RAM will be lost.