beautypg.com

Tv function – Polaroid FDX-0700T User Manual

Page 20

background image

- 20 -

TV Function

Use the ▼、▲ buttons to select the item you want to set.
Use the ►, ◄ buttons to select the item and enter it.
First use the ▼、▲ buttons to highlight the TV SETUP, then press the ► button on the
remote control to exit from the setup menu, and press the ◄ button on the remote
control to return to the picture setup menu.

Signal
Use the ► direction button to select CATV TV signal input mode.
Use the ◄ direction button to select ANT TV signal input mode.

Channel
Use the ►, ◄ buttons to change the channel. In CATV input mode, you can select
channels from 2 to 125; in ANT input mode, you can select channels from 2 to 69.

Skip
When the ► button is pressed to turn the function ON, it will skip the current channel

when using ▼、▲ to select channels.

When the ◄ button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.

Blue Screen
This function is only available when there is no input signal.
Use the ► button to turn the function ON, use the ◄ button to turn the function OFF.

Fine Tuning
Use the ▼、▲ buttons to select Fine Tuning, and then press the ►, ◄ buttons to tune
forward or backward from the current channel.

Auto Memory
Use the ▼、▲ buttons to select Auto Memory, press the OK or ► button to enter auto
memory mode:





SEARCHING CH:009

EXIT:

--------------------------------------------