Tv function, Basic operation, Picture parameter setup – Polaroid FDX-0700T User Manual
Page 19: Tv system setup
- 19 -
TV Function
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the buttons on the remote control to select the desired channel. To go to a
channel directly, first press the number buttons on the remote control for input and then
press the OK button for confirmation. You may also wait for a moment without pressing
the OK button and the unit will go to the selected channel.
Some preferences can be preset:
Picture Parameter Setup
Press the TV/LCD SETUP button once on the remote control to enter PICTURE setup
menu, and screen display as shown:
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the ►, ◄ buttons to adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select English,
French or Spanish.
To restore settings to the factory default values, use the ▼、▲ buttons to select Reset,
then press the OK or ► button to confirm the change. To exit the setup menu, first use
the ▼、▲ buttons to highlight PICTURE, then press the ◄ button on the remote control.
Press the ► button on the remote control to enter TV Setup menu.
TV System Setup
When the ► button is pressed, the TV system setup menu will appear:
PICTURE
BRIGHTNESS
10
CONTRAST
10
COLOR
10
LANGUAGE ENGLISH
RESET
EXIT ◄ ►TV SETUP
TV SETUP
SIGNAL CATV
CHANNEL 002
SKIP
OFF
BLUE SCREEN OFF
FINE TUNING
AUTO MEMORY
◄ PICTURE EXIT ►