Planet Technology ADE-3400 - Manual (Page 45)

Time Server IP Address: Enter the IP address of your time server. Check with
your ISP/network administrator if you are unsure of this information.
Time Zone: Choose the time zone of your location. This will set the time
difference between your time zone and Greenwich Mean Time (GMT).
Daylight Savings: Select this option if you use daylight savings time. Daylight
saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening.
Start Date: Enter the month and day that your daylight-savings time starts on if
you selected Daylight Savings.
End Date: Enter the month and day that your daylight-savings time ends on if
you selected Daylight Savings.
Calibrate system clock with Time Server now: Click this button to have your
Router use the time server (that you configured above) to set its internal system
clock. Please wait for up to 60 seconds while the ADE-3400/4400 locates the
time server. If the ADE-3400/4400 cannot find the time server, please check the
time server protocol and its IP address. If the IP address was entered correctly,
try pings it to test the connection.
Date
Current Date: This field displays the date of your ADE-3400/4400.
Each time you reload this page, the router synchronizes the time with the time
server.
New Date (yyyy-mm-dd): This field displays the last updated date from the time
server. When you select None in the Use Time Server when Bootup field, enter
the new date in this field and then click Apply.
Time
Current Time: This field displays the time of your router. Each time you reload
this page, the ADE-3400/4400 synchronizes the time with the time server.
New Time: This field displays the last updated time from the time server.
When you select None in the Use Time Server when Bootup field, enter the
new time in this field and then click Apply.
45