Philips SE659 - Manual (Page 64)

62 Telephone answering machine (TAM)
15.3 Turn the Answering Machine
On/Off from the Handset
You can turn the answering machine on
or off from the handset as follows.
1
Press the
m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2
Scroll
n to Answer On/Off and
press
o Select.
3
Scroll
n to select Line 1 or Line 2
and press
o Select.
4
Scroll
n to select On or Off and
press
o Select.
• A validation tone is emitted and
the screen returns to Answer
Machine menu.
15.4 Play, Record, or Delete an
Outgoing Message
You can record a personalized message
to be played when the answering
machine picks up an incoming call.
The maximum length of an outgoing
message is 1 minute.
1
Press the
m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2
Scroll
n to Record OGM and
press
o Select.
3
Scroll
n to select Line 1 or Line 2
and press
o Select.
4
Scroll
n to select Answer & Rec.
or Answer Only and press
o
Select.
5
Scroll
n to select Play, Record
Message, or Delete and press
o
Select.
• If Play is selected, the current
outgoing message is played.
• If Record Message is selected,
a beep sounds and message
recording starts automatically.
• If Delete is selected and a
personal outgoing message was
previously recorded, Deleted is
displayed. The predefined OGM
is reinstated automatically.
15.5 Set the Answer mode
There are 2 answer modes available:
Answer Only and Answer & Record. By
default, the answer mode is Answer &
Record, which lets your caller leave a
message on the answering machine. This
can be changed to Answer Only mode,
which does not allow your caller to leave
any messages on the answering machine.
1
Press the
m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2
Scroll
n to Answer Mode and
press
o Select.
3
Scroll
n to select Line 1 or Line 2
and press
o Select.
4
Scroll
n to select Answer & Rec.
or Answer Only and press
o
Select.
• A validation tone is emitted and
the screen returns to Answer
Machine menu.
Depending on the answer mode you have
selected, the appropriate default outgoing
Note
Note