Philips SE659 - Manual (Page 54)

52 Advanced settings
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
13 Advanced settings
These settings can be made from any
registered SE659 handset. They cannot
be made from the base station.
13.1 Easy Call
When activated, this feature allows you
to dial a preset number by pressing any
key on the handset (except
c Cancel).
This feature is useful for fast access to
emergency services.
13.1.1 Set Easy Call to On or Off
Follow this procedure to switch Easy
Call on. To switch Easy Call off, see the
Note at the end of this section.
1
Press
m in idle mode, scroll n to
Advanced Set and press
o
Select.
2
Easy Call is highlighted. Press
o
Select to enter the Easy Call menu.
3
Mode is highlighted in the display.
Press
o Select again to select
Mode, then scroll
n to On.
4
Press
o Select to confirm the
selection.
• If an Easy Call number has not
been set, you will be prompted
to input the Easy Call number.
• If an Easy call number has already
been set, the screen returns to
idle mode. If you want to edit the
number, press
c Cancel and
scroll to Number and press
o
Select, edit the new number
and press
o OK.
When you switch Easy Call on, Easy
Call On will be displayed on your screen
in standby mode. You can still answer
any incoming call as normal.
To switch Easy Call off from idle mode,
press
c Cancel. Mode is highlighted in
the display. Press
o Select again to
select Mode, and then scroll
n to Off.
Press
o Select to confirm.
13.1.2 Set Easy Call number
1
Press
m in idle mode, scroll n to
Advanced Set and press
o
Select.
2
Easy Call is highlighted in the
display. Press
o Select to enter
the Easy Call menu.
3
Mode is highlighted in the display.
Scroll
n to Number and press o
Select.
4
Input the Easy Call number.
5
Press
o OK to confirm.
• A validation tone is emitted and
the screen returns to the Easy
Call menu.
Note