Paxar 6017 User Manual

Page 26

A-4 Specifications

For Wall-Mounting:

Wall-mounting hardware is not

included.

Use two screws or nails that support

at least 5 pounds (2.3 kg.).

1. Place the unfolded stand against the wall.

2. Use a pencil to mark inside the two keyholes for the

screws or nails.

3. Attach the screws or nails through the keyholes and

into the wall.

4. Slide the printer into the stand until the button

catches in the stand.

5. Adjust the height of the stand by moving the wire bar

into different grooves if you notice glare on the
handheld’s display.

Keyhole