Play from an external device, Adjust volume level, Play audio files from bluetooth devices – Philips HK-1032-DS8550 User Manual
Page 18

19
»
If connection is successful. the unit beeps and the indicator turns
on stably.
»
If the pairing cannot be completed within one minute, the
indicator flashes slowly.
Tip
•
If your Bluetooth device is already paired with DS8550 before, you just need to find
out the “PHILIPS DS8550” on your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth device,
•
Move it beyond the communication range; or
•
Press ; or
•
Turn off the connected device
Play audio files from bluetooth devices
Note
•
Make sure the Bluetooth connection between the unit and the device is active.
•
To start play, press
on the remote control.
•
To pause/resume play, press
again.
•
To track up/down, press forward/backward keys.
Play from an external device
You can also listen to an external audio device through this unit.
1
Press to select Aux-in mode.
2
Connect the supplied Aux-in link cable to:
•
the AUX IN jack (3.5mm) on the back of the unit.
•
the headphone jack on an external device.
3
Start to play the device (see the device user manual).
Adjust volume level
1
During play, press VOL +/- to increase/decrease the volume level.
English
EN