Using balance adjustment, Introduction of audio adjustments, Audio adjustments – Pioneer DEH-P6000UB User Manual

Page 26

Introduction of audio
adjustments

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-
lect.

Turn MULTI-CONTROL to select the

audio function.
Turn

MULTI-CONTROL to switch between the

audio functions in the following order.
FADER/BALANCE (balance adjustment)

—

PRESET EQUALIZER (graphic equalizer recall)
—EQ SETTING 1 (graphic equalizer adjust-
ment)

—EQ SETTING 2 (graphic equalizer fine

adjustment)

—LOUDNESS (loudness)—

SW SETTING 1 (subwoofer on/off setting)

—

SW SETTING 2 (subwoofer setting)

—HPF

(high pass filter)

—BASS BOOST (bass boost)

—SRC LV ADJUST (source level adjustment)

Press MULTI-CONTROL to display the

setting mode of each function.

# Push MULTI-CONTROL left to display the
function selection menu.
# Push and hold MULTI-CONTROL left to dis-
play the main menu.

Adjust the each function.

Notes

! You can also select the audio function by

pressing

AUDIO on the remote control.

! To return to the previous display, press BACK.
! To return to the main menu, press and hold

BACK.

! To return to the ordinary display, press

BAND/ESC.

! When the subwoofer controller setting is

PREOUT:REAR, you cannot switch to
SW SETTING 1 (subwoofer on/off setting).
(Refer to page 31.)

! You can select the SW SETTING 2 only when

subwoofer output is turned on in
SW SETTING 1.

! When selecting FM as the source, you cannot

switch to

SRC LV ADJUST.

! If you do not operate functions within about

30 seconds, the display automatically returns
to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.

Use MULTI-CONTROL to select

FADER/BALANCE.

Press MULTI-CONTROL to display the

setting mode.

Press MULTI-CONTROL to select the seg-

ment you wish to set.
Press

MULTI-CONTROL repeatedly to switch

between fader and balance.

Turn MULTI-CONTROL to adjust speaker

balance.
Front/rear speaker balance can be adjusted
between

FAD F15 and FAD R15.

Left/right speaker balance can be adjusted be-
tween

BAL L15 and BAL R15.

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is
REAR SP :SUB W, adjusting the front/rear speak-
er balance is not effective. Refer to Setting the
rear output and subwoofer controller on page
31.

Audio Adjustments

Section