Receiving pty alarm broadcasts 13, Introduction of advanced, Operations – Pioneer DEH-P6000UB User Manual

Page 13: Storing the strongest broadcast, Frequencies, Tuning in strong signals 13, Selecting alternative frequencies 13, Operating this unit, Receiving pty alarm broadcasts, Introduction of advanced operations

# You can also store the frequency in memory
by pushing and holding

MULTI-CONTROL right.

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station. Press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press
BAND/ESC or LIST.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,
the unit receives it automatically (

ALARM ap-

pears). When the broadcasting ends, the sys-
tem returns to the previous source.
! An emergency announcement can be can-

celed by pressing

TA.

Introduction of advanced
operations

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select

FUNCTION.
Turn to change the menu option. Press to se-
lect.

Turn MULTI-CONTROL to select the

function.
BSM (best stations memory)

—REGIONAL (re-

gional)

—LOCAL (local seek tuning)—

PTY SEARCH (program type selection)

—

TRAFFIC (traffic announcement standby)

—AF

(alternative frequencies search)

—NEWS

(news program interruption)

Notes

! You can also select the function by pressing

FUNCTION on the remote control.

! To return to the previous display, press BACK.

! To return to the main menu, press and hold

BACK.

! To return to the ordinary display, press

BAND/ESC.

! If MW/LW band is selected, you can only se-

lect

BSM or LOCAL.

Storing the strongest broadcast
frequencies

BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.

Use MULTI-CONTROL to select BSM in

the function menu.

Press MULTI-CONTROL to turn BSM on.

The six strongest broadcast frequencies are
stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.

% Press LOCAL repeatedly to select the
desired setting.
FM:

OFF

—LEVEL 1—LEVEL 2—LEVEL 3—

LEVEL 4
MW/LW:

OFF

—LEVEL 1—LEVEL 2

The

LEVEL 4 setting allows reception of only

the strongest stations, while lower settings let
you receive progressively weaker stations.

Note

You can also perform this operation in the menu
that appears by using

MULTI-CONTROL.

Selecting alternative frequencies

When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.

Operating this unit

English

Section