Panduit Cougar LS9 - Manual (Page 9)

KEYBOARD FUNCTIONS
9
Loading the Batteries
1. Remove the battery door from the back of the C OUGAR
™ LS9 printer. If the
impact bumper is installed on the printer, you will have to move it away from
the battery door first.
2. Install the 6 AA batteries according to the molded indicators within the battery
compartment.
3. Reattach the battery door. Move the impact bumper back over the battery
door if necessary.
Observe Correct Polarity When Installing
Batteries
Replace All Six Batteries At The Same Time
Loading a Label Cassette
1. Remove the cassette door from the back of the C OUGAR
™ LS9 printer.
2. Install a label cassette. Press firmly to lock the cassette in place. Do not
remove the raised white tab from the cassette. This tab is used to assist with
removal of the cassette from the LS9 printer.
3. Lock the print head latch.
4. Reattach the cassette door.
NOTE: To uninstall a label cassette:
1. Unlock the print head latch.
2. Remove the cassette door.
3. Remove the cassette. Use the removal tab on the cassette
for assistance.
4. Reattach the cassette door.
Print Head Latch