Planar PL201M - Manual (Page 7)

6
Quick Installation
1. Make sure the computer and the LCD monitor are both turned off.
2. Attach the power cord to the LCD monitor.
3. When using a power cord, plug the male end in a wall socket.
4. If using a PC power cord, plug the male end in the socket of the computer power supply
(if equipped).
5. Plug one end of the video cable in the (Analog or Digital) video signal connector of LCD monitor and the other
end in video signal connector of the computer.
6. Turn on the computer.
7. Turn on the LCD monitor.
8. Adjust the user controls to optimize your personal preference (see Operation section, call your local
dealer if you have any problems).
POWER ANALOG DIGITAL AUDIO