Perle Systems RPS1630 - Manual (Page 28)

5-4
RPS Series: Remote Power Switches - User's Guide
5.2.2. Accessing the Text Interface
The Text Interface can be accessed via Network, modem or local PC. In order
to access the Text Interface, your installation must include the following:
• Access Via Network: The RPS must be connected to your TCP/IP
Network, and your PC must include a communications program (such as
Hyperterminal™.)
• Access Via Modem: An external modem must be connected to the
RPS’s Console Port, and a phone line must be connected to the external
modem. Your PC Must include a communications program.
• Access Via Local PC: Your local PC Must be connected to the RPS’s
Console Port. The local PC must include a communications program.
Remote Power Switch v1.43s Site ID: (undefined)
Plug | Name | Password | Status | Boot/Seq. Delay | Default |
-----+------------------+-------------+--------+-----------------+---------+
1 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
2 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
3 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
4 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
5 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
6 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
7 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
8 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
-----+------------------+-------------+--------+-----------------+---------+
“/H” for help.
RPS>
Figure 5.2: Plug Status Screen - Text Interface (Model RPS830 Shown)