Pro-tec Automobile Alarm User Manual
Page 7
5.
Mount brake safety switch in convenient
and secure location. Connect switch to
terminal block.
IMPORTANT: The brake safety switch must
be turned off before trailer is to be towed.
This switch is to prevent accidental trailer
brake activation while towing.
NOTE: If this switch is not installed,
the alarm brake feature will not work.
6.
Connect siren (red wire) to control module
terminal block, connect (black wire) to trailer
ground.
7.
Connect 12 gauge wire from negative
battery terminal to control module terminal
block.
8.
Connect 12 gauge wire from positive
battery terminal to control terminal block.
NOTE: When alarm is first powered up
the siren will sound. Press the remote
button #1 twice. First time will silence
alarm, second will shut off alarm. Then
press reset button on alarm box. LED
light should now be off.
For Pro-Tec System One Plus package:
9.
Connect pager to control unit.
Follow Pager Instructions.