Manual configuration – PNY P-DSA150-PCI-RF User Manual
Page 8
Aug/07
MN2036400000
8
5.
When asked Are You Sure (Y/N)?, press Y to accept.
6.
Press Ctrl+E to exit the BIOS.
7.
When asked Are you sure to exit (Y/N)?, press Y to exit and
reboot.
8.
Continue with steps outlined in Appendix A for formatting your
hard disk drive.
Manual configuration
1.
As the BIOS boots press Ctrl+S or F4 when prompted to enter
the RAID BIOS.
2.
At the next screen select Create RAID Set, then press Enter.
3.
Select Striped, then press Enter.
4.
Select Manual configuration then press Enter
5.
Select the first drive, press Enter.
6.
Select the second drive, press Enter.
7.
Select chunk size from 4k, 8k, 16k, 32k, 64k or 128k, then press
Enter.
8.
When asked Are You Sure(Y/N)?, press Y to accept.
9.
Press Ctrl+E to exit the BIOS.
10. When asked Are you sure to exit(Y/N)?, press Y to exit and
reboot.