PNY P-DSA150-PCI-RF - Manual (Page 13)

Aug/07 MN2036400000 13
follow the section “Rebuilding a Failed Mirror Set” to rebuild the
mirror.
Low Level Format
Low Level Format is build into the RAID BIOS to make it more
convenient to erase the entire contents of a hard disk drive, including
data, drive and partition information. The Low Level Format utility
works on single hard drive only, before the RAID set is configured.
BIOS Configuration
The Serial ATA 2-Channel RAID adapter BIOS will appear every time
your system starts up. If the BIOS doesn’t show, please try your
controller in another PCI slot. During this (POST) process, the BIOS
will show up and indicate the devices attached to it.
Driver Installation
For Windows® 2000
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “ PCI_IO\Sata\RAID” folder, found on the driver CD, onto a