Philips AW3000 - Manual (Page 14)

12 EN
Option 2: Set up through a
non-WPS Wi-Fi router and
Android device
1
Before setup, make sure that your Android
device is connected to your home Wi-Fi
network.
2
Read the Wi-Fi setup instructions on the app.
3
As instructed, briefly press WI-FI SETUP
on the back of AW3000.
» The power/status indicator blinks
amber and white alternately.
» A new Wi-Fi network created by
AW3000 will appear, with the network
name (SSID) of Philips_Install.
WiFi SETUP
< 3S
< 30S
4
Tap Next on the above app screen.
» Your Android device starts to connect
with the new Wi-Fi network created
by AW3000 automatically.
5
Wait until the speaker is found.