Alarm function, Setting the alarm, Activating the alarm – Philips 14PT3685/05 User Manual

Page 13: Switching off the alarm

Alarm function

This function allows you to use your TV as an alarm clock.
You can programme your alarm to wake you up to the TV, radio or 3
different melodies.

Setting the alarm

Press

SET ALARM

on the remote control.

The

ALARM

menu is displayed on the screen.

You can also access this menu by pressing

, then selecting the

A L A R M

option.

If you want to set the time on the clock, select

SET CLOCK

and enter the

current time using keys

Important: the time is reset automatically each time the set is switched on using
teletext information taken from programme 1. If programme 1 does not have
teletext, the update will not take place. If you modify the time, the analogue clock
on the set will be reset a few seconds later.

Select

S TA RT T I M E

and enter the time at which the set is to switch on using

the keys

Select

MODE and pre s s

. Now choose the mode in which you want your

set to wake you up.

†

Select

TV PROGRAM, RADIO PRESET

ALARM

then enter the number of

the TV or radio programme or choose between 3 different melodies
(

MORNING BIRD, RAINFOREST

FALLING STA R )

N o t e : it is the last setting selected that will be used for the alarm .

Press

to return the first level of the

A L A R M

menu.

Select

V O L U M E

and adjust the level required for the alarm.

Press

to exit the menu.

Activating the alarm

Press

ALARM ON/OFF on the remote control to activate or

desactivate the alarm function.The green

indicator on the set comes

on when the alarm is on.

Press

to put the set into standby mode. It will switch on automatically at

the programmed time and mode. The light also comes on when the alarm

comes on.

If you leave the set switched on, it will merely change made and
programmes at the set time.
Caution: for the alarm to work, do not switch off the set using the on-off button
on the front of the set.
The set switches to standby automatically after 4 hours if no further commands
are given.

Switching off the alarm

When the alarm is on, press

RESET

(or

) on the remote control to

switch off. It will start up automatically 24 hours later at the programmed
time.

In the ALARM mode, press any key to turn the alarm off. If not, the alarm stays on
for 15 seconds before being turned off. It starts up again 5 minutes later and stays
on for 30 seconds before stopping completely.

If you wish to turn off the alarm function completely, press

ALARM

ON/OFF

.The

indicator is switched off.