Tv light, Setting the clock – Philips 14PT3685/05 User Manual

Page 10

The television set is equipped with an analogue clock on the front of the
set. It is set using the menus.

Automatic r e s e t :

The time is automatically reset, each time the set is switched on, using
teletext information taken from TV programme 1.
• If it does not have teletext, the time will not be updated.
• If the appliance has been disconnected from the mains, the hands on the

clock will move through 360° when switched on.

The television set is equipped with a backup system which stores the time when
the appliance is disconnected from the mains.

To manually set the clock:

Press

SET ALARM

on the remote control.

The

C L O C K

menu is displayed on the screen.

Press

once to select

SET CLOCK.

Enter the current time using

.The time on the analogue

clock is updated a few seconds later.

Press

SET ALARM

again to exit the menu.

Changing the time:

For countries which change their clocks twice a year (summer time, winter
time), the clocks are reset automatically using the teletext information
taken from programme 1. However, the time is only updated when the
television set is switched on.

TV light

The feet and clock of the television set are luminous and backlit.

Use the

key on the remote control to switch the lighting on and off .

Use the

keys to increase or decrease the intensity of the 3 levels of

lighting.
Note: the lighting controls are independent of the television controls (it may be in

TV, radio or standby mode). However the lighting does not operate when the set is
switched off using the on-off key.

Setting the clock