Polaris Trailboss 7174820 - Manual (Page 74)

1
2
3
74
MAINTENANCE AND LUBRICATION
Throttle Cable Freeplay
Throttle cable freeplay is adjusted at the handlebar.
1. Locate the throttle cable
adjuster on the
handlebar.
2. Squeeze the end of the rubber
boot (1) and slide it far
enough to expose the end of
the inline cable adjuster (2).
3. Loosen the locknut (3).
4. Rotate the boot to turn the
adjuster until 1/16″ to 1/8″
(2-3 mm) freeplay is achieved
at the thumb lever.
NOTE: While adjusting
freeplay, be sure to flip
the throttle lever back
and forth.
5. Tighten the locknut.
6. Squeeze the end of the rubber
boot and slide it over the
cable adjuster to its original
position.