Pioneer M-F10 - Manual (Page 21)

21
6 More Tuner Features
Saving station presets
You can save up to 30 station presets so that you always have
easy access to your favorite stations without having to tune in
manually each time. After you've set a station preset you can
give it a name so you can remember which is which.
The following instructions assume that you are already
familiar with tuning into radio stations — turn back to page
17 for detailed tuning instructions.
SYSTEM
SET
MENU
4 ¢
1 Tune into a radio station on either the AM or
FM band.
See page
17 for detailed instructions on how to do this.
2 Press SYSTEM MENU, then SET.
3Use
4 or ¢ to select STA. MEMORY, then
press SET.
4 Choose a station preset in which to save the
station's frequency.
You can save up to 30 station presets. Use the
4 and ¢
buttons to select a preset number (1–30).
The number of the currently selected station preset blinks.
5 Press SET to save the station.
The display flashes to indicate that it's saved.
Note: Station presets remain memorized for several days if
the system is disconnected from the power outlet. After this
time, station presets are lost and you’ll have to reprogram
them.
Listening to a station preset
When using the tuner button to switch between FM and AM,
you've probably noticed a third option. This is the station
memory mode, in which you can listen to the stations you’ve
previously memorized.
4 ¢
1 If the system is not already in tuner mode,
press TUNER.
2 Use the
4 and ¢ buttons to step through
the station memories.
The tuner will jump immediately to the frequency in the
station memory. Unless you've given the station memory a
name (see below for how to do this), the display shows the
station memory number and the frequency.