Pioneer VSX-AX5Ai-G - Manual (Page 70)

Using other functions 09
70
En
Resetting the system
Use this feature to reset the system to its factory default
settings.
1 Switch the receiver into standby.
2 While holding down the front panel TONE
button, press and hold STANDBY/ON for about
three seconds.
The display shows RESET? .
3 Press the front panel TONE– button.
The display shows OK? .
4 Within 5 seconds, press the TONE+ button.
The display shows OK and the receiver should now be
reset.
Note
• Make sure the multi-room feature is switched off
when doing this.
• If the receiver is unplugged from the AC outlet for a
month or more, it resets to the default settings.
VSX-AX5Ai.book 70 ページ ２００４年６月２日 水曜日 午後３時２７分