Pioneer VSX-AX5Ai-G - Manual (Page 20)

Connecting your equipment 03
20
En
Connecting the multichannel analog outputs
For DVD Audio and SACD playback, your DVD player may
have 5.1, 6.1 or 7.1 channel analog outputs (depending
on whether your player supports surround back
channels).
1 Connect the front, surround, center and
subwoofer outputs on your DVD player to the
corresponding MULTI CH IN jack on this receiver.
• Use standard RCA phono cables for the connections.
• Take care to connect each output to its
corresponding input on the receiver.
2 If your DVD player also has outputs for surround
back channels, connect these to the corresponding
MULTI CH IN jacks on this receiver.
• Use standard RCA phono cables for the connections.
• If there is only a single surround back output, be sure
to connect it to the SURROUND BACK L jack on this
receiver.
Note
• To listen to multichannel analog audio you’ll need to
press MULTI CH INPUT on the remote (see Using the
multichannel analog inputs on page 42 for more on
this).
S400
S400
CENTER
SELECTABLE
R L
R L
R L
MULTI CH. OUT
SURR.
BACK
FRONT SUB W. CENTER
SURR.
DVD player
MULTI CH
OUTPUT
VSX-AX5Ai
1 2
VSX-AX5Ai.book 20 ページ ２００４年６月２日 水曜日 午後３時２７分