Polycom IPOWER 70 - Manual (Page 9)

Connecting an Additional Power Cable
9
Connecting an
Additional Power
Cable Although the camera cable provides power to the iPower 70 camera,
if you are using a camera cable longer than 32.8 feet (10 meters), you
must use an additional power cable for the camera.
To connect an additional power cable:
1. Plug the additional power cable into the power connector on the
back of the camera .
2. Plug the other end of this cable into an appropriate power source.
If you are in the process of installing an entire collaboration system,
you may now return to your collaboration system installation
instructions.
If you are mounting this camera on a tripod, refer to the mounting
instructions included with your tripod mounting kit.
a
a