Applied operation, Speed dial, 1 storing/checking speed dialling nos – Panasonic Digital Cordless Telephone System User Manual

Page 17

APPLIED OPERATION

1. Speed Dial

You can store frequently-dialled outside or internal Nos. under speed dialling Nos. for quick
calling.

1.1 Storing/Checking Speed Dialling Nos.

You can store up to 10 speed dialling Nos., each consisting of up to 32 digits.

Reference:

• You can store speed dialling Nos. even when out of range or while making another call.
• The stored Nos. remain in memory even when the power is OFF.

1. Press the [Programming] key while the PS is not

being used or even if a call is in progress to enter
the programming mode.

2. Press [Speed dial] key.

3. Storing/Checking a Speed Dialling No.

[To store a speed dialling No.]

(1) Press the Speed dial No. (1 to 9 and

0) under which to store the destina-
tion telephone No.

Reference: • You can also press the volume keys

(

▲

and

▼

) to go forward or to go

previous speed dial Nos.

(2) Enter the telephone No. (32 digits

max.).

Reference: • If you make a mistake entering the telephone No., press the [On-Hook] or

[HOLD] key to erase the telephone No. and enter the telephone No. again.
Each press of the [HOLD] key deletes a letter from the last entered
telephone No. Also, pressing the [On-hook] key deletes the entire tel-
ephone No.

• To enter a pause, press the [Redial] key. Set the pause time in the

“Programming Manual.”

[To check a speed dialling No.]

(1) Press the Speed Dial No. (1 to 9, 0)

that you want to check.

Reference: • Press the [Volume] key (

▲

and

▼

) to display the Speed Dial No. on the

display.