Patterson-Kelley TBIG-03 User Manual
Page 5
Safety
tion of the boiler, adjustment of its various mecha-
nisms, and all applicable safety precautions. If any of
the provisions of this manual are not fully and com-
pletely understood, contact the Patterson-Kelley Sales
Department at (570) 421-7500 for assistance.
3.3 S
AFETY
F
EATURES
It is the responsibility of the customer to maintain the
safety features of this machine, such as: guards, safety
labels, safety controls, interlocks, lockout devices,
etc., in place and operable.
3.4 S
AFETY
L
ABELS
The safety labels shown above are affixed to your
boiler. Although the labels are of high quality, they
may become dislodged or unreadable over time. Con-
tact Patterson-Kelley at (570) 421-7500 for replace-
ment labels.
3.5 S
AFETY
P
RECAUTIONS
Provide a suitable location for the boiler, away from
normal personnel traffic, with adequate working space,
adequate clearances, proper ventilation and lighting,
with a structure sufficiently strong and rigid to support
he weight of the boiler, all piping, and accessories.
t
3
.5.1 Electrical Hazards
· High voltage! Shock hazard. Properly lock-
out/tagout the electrical service and all other energy
sources before working on or near the machine.
· Install a lockable disconnect switch.
3.5.2 Burn, Fire, and Explosion Hazards
General Warning
Hot Surface
· Burn, fire, and explosion hazards! Installation must
be in strict conformance to all applicable codes and
standards including NFPA 54 and ANSI Z223.1, (or
in Canada, CAN-B 149). Install all required vent
- 3 -