Philips DTR6610 - Manual (Page 13)

2.3 Using the remote to control your digital receiver –The remote
control is set to STB mode
English
U S I N G YO U R R E M O T E C O N T R O L 11
FAV
Open / close the current channel
list.
GUIDE
Open / close the Program Guide
RADIO
Toggle between TV and Radio
modes. Wake up from standby.
Standby B B
Switches your receiver into the
standby mode.
EXIT
Returns to normal viewing mode.
If [EXIT] is pressed and held for
at least 2 seconds, the currently
launched application is killed and
normal viewing is resumed. After
that the "autostart" status is
switched off temporarily as long as
the box is tuned to this channel.
P+ / P-
- In viewing mode: Tunes to the
higher/lower channel within the
same channel list.
- scrolls one page up or down in
channel list
- In standby Wakes up the Digital
Receiver.
4 4
Open the Options menu to
change momentarily soundtrack /
subtitles / teletext / display format
setting.
VW
- Switches the Channel Banner
in the browsing mode.
- Scrolls selection up/down in a
menu or channel list.
CB
- In Channel Banner, switch
between the current and next
program.
OK key
Confirms your choices.
REC
Open the Setting a Timer
screen.
MODE
Selects the remote control mode
(STB, TV, VCR, DVD, AMP-
TUNER).
A A +/-
Change the volume level on your
TV or Digital Receiver (refer to
2.2.2.2 for setting).
TV/STB a a
Toggles between watching
terrestrial digital programs
via your receiver and
standard analogue
programs via your TV set.
MENU
Opens / Closes the Menu.
m m
Switches between viewing mode,
Channel Banner, and Channel
Banner with Extended Info.
MUTE c
Mutes the sound on your TV or
Digital Receiver (refer to 2.2.2.2
for setting).
BACK
- In viewing mode: Returns to the
previously tuned channel
- In menu mode returns to the
previous screen.
WHITE/TEXT
TXT button used in MHP
applications.
0-9
- In viewing mode: Selects
channels
- In menu; Selects directly menu
item or Sets new parameter
value
- In standby Wakes up the Digital
Receiver.
RED, GREEN, YELLOW, BLUE
Contextual buttons used in MHP
applications.
6610_A5_GB.qxd 01/09/2004 12:58 Page 11