Opening the setup menu – Panasonic WV-C L924A User Manual

Page 19

Text mode
Original mode

• Opening the Setup Menu

Hold down

I for 2 seconds or more to display the

CAM SET UP menu. You can confirm the current set-
tings on the menu.

Check the current settings on the menu.
Move the cursor to END in the bottom line, and press
I to close the menu and return to the camera picture.

-20-

** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC

END SET UP DISABLE

↵

Blinking

Note:

The menu displayed on the monitor will close and

change to the camera picture if no button is
pressed for 5 minutes.

This manual is related to the following products:

WV-C L920A