Pioneer DEH-P75BT - Manual (Page 53)

Making a call by entering
phone number
You can make a call by directly entering phone
numbers on this unit.
1 Use MULTI-CONTROL to select
Number dial in the function menu.
Number dial appears in the display.
# You can also enter in this menu from the
standby display by pressing
DIRECT on the re-
mote control.
2 Push MULTI-CONTROL up or down to
select a number.
Pushing
MULTI-CONTROL up repeatedly
changes numbers in 0 1 2 ... 9 + # * _ order.
Pushing it down changes in _ * # + 9 ... 2 1 0
order.
# You can also input numbers by pressing 0-9
on the remote control.
3 Push MULTI-CONTROL right to move
the cursor to the next position.
When the number you want is displayed, push
MULTI-CONTROL right to move the cursor to
the next position and then select the next
number. Push
MULTI-CONTROL left to move
backwards in the display.
# Up to 24 digits can be entered.
4 If you have completed entering the
number, press MULTI-CONTROL.
Call confirmation appears.
5 Press MULTI-CONTROL again to make a
call.
While dialing,
Dialing appears in the display.
6 To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Echo canceling and noise
reduction
When you are operating hands-free phoning
in the vehicle, you may hear undesired echo.
This function reduces the echo and noise and
keeps a certain sound quality.
! This feature cannot be set for each different
user phone.
1 Use MULTI-CONTROL to select
Echo cancel in the function menu.
Echo cancel appears in the display.
2 Press MULTI-CONTROL to turn echo can-
celing on.
ON appears in the display.
# To turn echo canceling off, press
MULTI-CONTROL again.
Changing the ring tone
The unit offers you to turn the ring tone for in-
coming calls on or off.
! The ring tone you select for this unit has no
effect on the ring tone used by your phone.
If you do not want your phone and this unit
to ring at the same time, we recommend
you turn the ring tone of one or the other
off.
1 Use MULTI-CONTROL to select
Ring tone in the function menu.
Ring tone appears in the display.
2 Push MULTI-CONTROL left or right to
select a ring tone.
Each time
MULTI-CONTROL is pushed left or
right, the ring tone is selected in the following
order:
OFF (ring tone off)
—BEEP 1 (ring tone 1)—
BEEP 2 (ring tone 2)
—BEEP 3 (ring tone 3)
Bluetooth Telephone
En
53
English
Section
08