Palsonic TFTV325FL - Manual (Page 31)

Making use of PVR recording function
(Continued)
PVR recording - digital only -
C. Check PVR File System
1. From File System menu, highlight Check PVR File System, press OK
to start.
2. Now a dialogue box appears prompting you to start to create disk
partition. Highlight Start and press OK to proceed to format the disk, all
data will be lost. (Or select Exit to abandon and exit)
3. Now File System Size screen pops up with PVR File System Type
highlighted. Hi Speed FS (select for high recording speed) and FAT32 can
be selected with 3
or4 button. (Note: If Hi Speed FS is choosed, it will
occupy disk space based on your PVR File System Size setting, while
FAT32 will not)
! If Hi Speed FS is choosed, then press 6 to highlight PVR File System
Size, use 3 or4 to select a size (the greater the size, the longer you can
make recording).The next line will show the recording time allowed (for
example, if shows “SD 294 Mins, HD 84 Mins”, that means recording SD
programs can last 294 minutes, while for HD programs, only 84 minutes is
allowed at your disk) . Then highlight OK and press OK to start formatting
the disk. The format may take several minutes, please wait. When finished,
Time Shift Size setting screen will pop up.
!
If FAT32 is choosed, then PVR File System Size can not be set. The
screen will show the recording time allowed. Highlight OK and press OK to
start formatting the disk. The format may take several minutes, please wait.
When finished, it starts to check recording speed.
4. After you choosed Hi Speed FS and set size and the format is finished, the
Time Shift Size screen pops up. Use 3
or4 to set Time Shift size for
time shifting (the time shift size ranges from 512MB to 8GB, the greater the
size, the longer the duration allowed for time shifting), then highlight OK and
press OK to proceed to check recording speed.
Checking speed may take several minutes, please wait. When finished, if
SUCCESS appears at the Check PVR File System line then you can start
PVR recording function.
(At File System menu bottom screen, USB Disk state and speed information
will appear, they can not be adjusted)
Select Move MENU Return
USB Disk
Speed
Select Disk C:
Start
EXIT EXIT OK OK
File System
Record Time 6 Hr.
Select Move MENU Return
Check PVR File System
USB Disk
Speed
Select Disk C:
Start
Select Disk
EXIT EXIT OK OK
File System
Create partition
Start Exit
Record Time 6 Hr.
Create disk partition.
Warning! All data will be lost.
Check PVR File System
Select Move MENU Return
Check PVR File System
USB Disk
Speed
Select Disk C:
Start
Select Disk
EXIT EXIT OK OK
File System
File System Size
OK EXIT
PVR File System Type Hi Speed FS
PVR File System Size All
Record Time 6 Hr.
SD 294 Mins HD 84 Mins
Select Move MENU Return
Check PVR File System
USB Disk
Speed
Select Disk C:
Start
Select Disk
EXIT EXIT OK OK
File System
Time Shift Size
OK EXIT
Time Shift Disk Size 5 GB
Record Time 6 Hr.
SD 80 Mins HD 25 Mins
Select Move MENU Return
Check PVR File System
USB Disk
Speed
Select Disk C:
Start
Select Disk
EXIT EXIT OK OK
File System
Format Disk
Record Time 6 Hr.
Do not unplug USB device.
Create PVR file system, please wait.
Select Move MENU Return
USB Disk
Speed
Select Disk C:
Checking
EXIT EXIT OK OK
File System
Record Time 6 Hr.
Check PVR File System
Checking
Pass USB Disk
Speed
5112KB/s
Select Disk
Check PVR File System SUCCESS
Pass
HD support
Select Move MENU Return EXIT EXIT OK OK
C:
File System
Record Time 6 Hr.
Note:
! After PVR File System checking, if “SD Fail” appears on the screen, that
indicates this external memory device is not suitable to be used for
recording, please replace with other one and try it again. If “SD Support”
appears, that means this external device is suitable to record SD program,
but not HD program. If “HD Support” appears, then both SD and HD
programs are OK.
31