Palsonic TFTV325FL - Manual (Page 20)

Memorizing the Channels & Programme Edit
ATV manual tuning - analogue only -
1
2
3
Use the Manual Tuning operation if desired channels can not be preset
by Auto Tuning or if you would like to preset channels to specific
position numbers one by one.
From ATV Manual Tuning setting menu, press 6 or5 to select
an item, press 3 or4 to set the item as shown below.
A. Storage To: Position selection. Press 3 or4 button to select
the position you want to store.
B. System: Sound system selection. If certain channel’s sound is
abnormal, it may be that the sound system setting is wrong. In
this case, select another sound system.
C. Current CH: Selects current channel using 3 or4 .
D. Search: Channel search operation.
Press 4 to search up the band or3 to search down the band.
Press 3 or4 repeatedly until your desired channel is displayed.
E. Fine-Tune: Manual fine tuning.
Press 3 or4 until better picture and sound are obtained.
F. Frequency: Shows current frequency, it can not be adjusted.
(During the process, you can press EXIT to exit the operation.)
In Channel menu, press 6 or5 to select ATV Manual Tuning,
then press4 or OK to access the setting menu.
SELECT MOVE MENU RETURN
Programme Edit
File System
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
ATV Manual Tuning
Storage To 11
SELECT
System
Current CH
Search
Fine-Tune
Frequency
SAVE EXIT
C-02
BG
445.25 MHz
Press RED button to save your settings.
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
Programme Edit
1 TV S-03
2 TV C-42
3 TV S-04
4 TV C-04
NAME DEL MOVE SKIP Fav.List
SELECT MOVE MENU RETURN
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
4
Within the programme list, press 6 or5 to select a channel you
want to label, press GREEN button to start to label. A cursor
appears at the edit field.
Use 6 or5 to select a character, use 3 or4 to move the cursor.
When finished, press OK to confirm.
The maximum length of label is 5 characters.
1 Press MENU. Press 3 or4 to select Channel menu, press 6
to access.
2
3
Press 6 or5 to select Programme Edit, press 4 or OK to
open the Programme Edit menu and a programme list is
displayed.
5
Repeat the above steps to label more channels.
Note: The labels of DTV channels are automatically assigned and
cannot be changed by user.
Adding or changing a channel label
- analogue only -
Channel Lock Picture Option Time Sound
Channel Lock Picture Option Time Sound
20