Philips DVD-930 - Manual (Page 16)

ENGLISH
16
PARENTAL CONTROL
ACTIVATING PARENTAL CONROL
This can only be done in Stop mode.
• Press Setup to obtain the Settings menu.
• Move to Parental Control using the (up/down) keys.
• Press < or > to change Parental Control to Active.
• You will be asked to enter a 4-digit pin code of your own choice,
and then to confirm your choice.
• This code must then be entered to play any DVD-Video or Video
CD disc, unless you have previously authorized the disc as
suitable for all ages.
• To de-activate Parental Control repeat the above procedure.
Authorizing discs
1 Load the disc you wish to authorize and close the tray
2 The OSD will ask for your pin code.
Enter your pin code.
3 Go to Stop, press 9.
4 Select Parental Control on the OSD by pressing >: the OSD
will ask you to enter your pin code.
5 The disc is now authorized, and will play in the normal way,
without the pin code.
To cancel your authorization, repeat steps 4 and 5.
NOTE
– You can have a total of 50 authorized discs. If you exceed
that number, the least frequently played disc(s) are
automatically de-authorized.
Insert Disc
Is this
disc Authorized?
Normal operation
Select
Parental Control
Enter Pin
Open Tray
Insert Disc
Is this
disc Authorized?
Normal operation
Select
Parental Control
Enter Pin Code
Press "STOP"
Enter Pin
Open Tray
NOT OK
OK
OK
NO
YES
NOT OK
TRY 3X
Change
Autorization
Change
Autorization
Enter Pin Code
Press "STOP"
NOT OK
OK
OK
NO
YES
NOT OK
TRY 3X
When Parental Conteol is active When Parental Control is active
AUTOPLAY:
Factory setting On means that discs start to play automatically
when loaded. Set to Off if you prefer to start play manually.
AUTO FTS:
Factory setting On means that when a disc with an FTS
program (see ‘Compiling an FTS Program’ p. 15) is loaded, the
FTS program automatically starts to play. Set to Off if you
prefer to control FTS play manually.
VIDEO SHIFT:
Factory setting is such that the video will be centered on your
screen. Use this setting to personalize the position of the
picture on your TV by scrolling it to the left or right.
DIGITAL OUTPUT:
Factory setting Off means that there is no audio signal at the
digital output. If you are connecting equipment with a
digital input, change the setting to on.
If your equipment doesn't incluid a digital decoder, (e.g. digital
speakers) set the digital output to PCM.
OSD LANGUAGE:
The player’s on-screen display will be in the language you
choose.
SETTINGS
1/DVD-930/935-ENGLISH 10-08-1999 09:56 Pagina 16