beautypg.com

Manual tv channel search, Using the satellite receiver, Automatic tuning – Philips 14PV365/07 User Manual

Page 9

background image

EN

6

6

Manual TV channel search

In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.

1.

1.

Press

. The main menu will appear.

2.

2.

Select 'TUNER SET UP' with

and

confirm with

.

3.

3.

Select 'MANUAL TUNING' with

and confirm with

.

4.

4.

Select 'PROG.' with

. Then press

.

5.

5.

With

or

, select the desired

programme number that you want to use for
the TV channel, e.g. 'P01'. Then press

.

6.

6.

Select 'CHANNEL' with

, and con-

firm with

. Then enter the desired chan-

nel with

.

When a channel is found,it will stop searching. If
this is the channel you want, press

. If you

set 'SKIP' on for a channel, this channel will be
ignored when going through the channels with

or .

To search for other TV channels, begin again at
step 4.

7.

7.

To end, press

.

Using the satellite receiver

You can receive channels from the satellite

receiver via the scart socket

.

To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys

on the remote

control.You will have to select the channel you
want to receive on the satellite receiver itself.

Automatic Tuning

During installation, all available TV channels are
searched for and saved. If you want to replace
the TV channels already saved with the new
ones, follow the instructions below.

1.

1.

Press

. The main menu will appear.

2.

2.

Select 'TUNER SET UP' with

and

confirm with

.

3.

3.

Select 'AUTO TUNING' with

and

confirm with

.

4.

4.

The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.

5.

5.

When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.

B 1

L C

K B

B 1

L C

K B

MENU

0..9

AV1/EXT1

STATUS/EXIT

P–

P+

B 1

0..9

B 1

L C

K B

B 1

0..9

L C

K B

B 1

L C

K B

B 1

L C

K B

B 1

L C

K B

MENU

MANUAL TUNING

→PROG.

P55

CHANNEL

055

DECODER

[OFF]

SKIP

[OFF]

SELECT K L CHOOSE B
END=EXIT

What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).

I don't know the channels for my TV stations In
this case, press

in 'CHANNEL' to start

the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.

L C

K B

PLEASE WAIT

START

FINISH

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

PAL I(EN).qx3 02.4.2 6:42 PM Page 6

This manual is related to the following products: