Specifications – Panasonic WV-CW484F User Manual

Page 47

Specifications

General specifications
Power source and power

24 V AC 60 Hz, 11 W (With heater), 12 V DC 470 mA

consumption:
Ambient temperature:

–10 °C - +50 °C {14 °F to 122 °F}
–30 °C - +50 °C {–22 °F to 122 °F}*

Ambient humidity:

90 % or less

Water resistance:

IEC60529 (IP66, Against ingress of water with harmful effects
powerful jetting)** (Camera unit)

Dimensions:

ø154 mm (W) x 141.2 mm (H)
{ø6.06" (W) x 5.55" (H)} (excluding connectors/terminals)

Weight:

Camera: Approx. 1.3 k

g {2.87 lbs.}

Camera attachment: Approx. 100

g {0.22 lbs.}

* With Heater Unit WV-CW4H (option)
** Applicable only when the installation and waterproof process are done properly

Camera
Image sensor:

1/3" interline transfer CCD

Effective pixels:

768 (H) x 494 (V)

Scanning area:

4.8 mm (H) x 3.6 mm (V)

Scanning method:

2:1 interlace scan

Scanning frequency

Horizontal: 15.734 kHz
Vertical: 59.94 Hz

Resolution:

Horizontal 480 TV lines (C/L Normal), 540 TV lines typ., 520 TV
lines min. (C/L High), 570 TV lines (B/W)

Signal-to-noise ratio:

50 dB (Equivalent to AGC Off, weight On)

Dynamic range:

52 dB typ

Minimum illumination:

1.5 lx { x.xx footcandle} at F1.4 (C/L),
0.16 lx {x.xx footcandle} at F1.4 (B/W),

Video output:

VBS 1.0 V [P-P] NTSC composite 75

Ω/BNC connector

Lens mount:

CS-mount

Major items on menu setup (Factory default settings are underlined.)
Language:

English, French, German, Spanish, Italian, Russian, Japanese, or
Chinese

Camera ID:

Up to 16 characters

Light control

ALC

Super Dynamic 3:

ON or OFF

Electronic shutter speed:

OFF (1/60), 1/100, 1/250, 1/500, 1/1 000,1/2 000, 1/4 000,
1/10 000 s

AGC:

ON (HIGH/MID/LOW), or OFF

Sensitivity enhancement:

OFF, x2 AUTO, x4 AUTO, x6 AUTO, x10 AUTO, x2 FIX, x4 FIX,
x6 FIX, x10 FIX, x16 FIX, x32 FIX

Synchronization:

Multiplexed vertical drive (VD2), Line-locked, or Internal

White balance:

ATW1, ATW2, or AWC

Motion detection:

MODE1, MODE2, or OFF