Peavey PV 1 UHF User Manual
Page 7
7
3.
The microphone is now ready to use. The A and/or B DIVERSITY LED INDICATORS (2) on the
receiver should now be lit, indicating a received signal from the transmitter. When ready to
speak, slide the transmitter switch to the ON position. Adjust the volume of the receiver as per the
Audio Output Microphone Connection section of the above receiver instructions.
[Note: Observe care in selecting P.A. volume, transmitter location and speaker placement so that
acoustic feedback will be avoided.]
*To preserve battery life, turn the transmitter off when not in use.
1.
Slide open the hinged BATTERY COMPARTMENT (18) and insert (2) fresh AA ALKALINE
BATTERIES (19), observing the correct polarity. Fresh alkaline batteries can last up to 10 hours
in use, but in order to ensure optimum performance, it is recommended that the battery be
replaced after 7-8 hours of use.
2.
The body pack is equipped with a 3.5mm LOCKING JACK (21) for connecting the audio input
selected. Connect either the INSTRUMENT CORD (22) or the HEADSET MIC (23) or LAVALIER
BODYPACK TRANSMITTER