Philips Fisio 625 - Manual (Page 76)

74 WAP services
- - -
Login , Password and Inactivity time are the same fields as for GSM settings.
Please refer to the previous section for information.
APN allows you to enter the address of the external data network you want to
connect to, a text string or IP address (e.g., wap.operatorname.fr) used to
establish the connection with your WAP Service Provider (ISP). Select
APN
and press
,
, then enter the approriate address and press
,
.
L
Error messages during WAP connections are mainly due to incorrect parameters:
you should contact your operator before first use, in order to have the
appropriate WAP and GPRS parameters. With some operators, WAP access
parameters can be set remotely. Please check directly by your operator.
Gateway
Allows you to enter or change the IP address and port number (subscription
dependent) for the gateway: select Gateway and press
,
, then enter the IP
Address and press
,
.
Homepage
Allows you to enter the WAP address of the homepage, the first page displayed
when accessing the WAP services. Select
Homepage and press
,
. Then enter
the URL address of the homepage (e.g. www.philips.com) and press
,
.
L
This feature is network-dependent: if the operator’s gateway gives an URL, it will
have priority on the Homepage URL you defined.
Bearer
Allows you to select the type of network used when launching a WAP session
and gives you access to the following items:
- -
When selecting GSM or GPRS , your mobile will only use the GSM or GPRS
network for WAP connections. When selecting GPRS first , it will first try to
connect to the GPRS network, then to the GSM network if the GPRS one isn’t
available when launching WAP.
Login Password APN Inactivity time
Gateway
Homepage
Bearer
GSM GPRS GPRS first
Fisio625_GB_4311 255 53832.book Page 74 Vendredi, 25. octobre 2002 6:10 18