Philips Fisio 625 - Manual (Page 19)

17 Main features
Flash dial
Instead of accessing the Phonebook menu and scrolling through the list, you can
link the relevant name card to a hotkey, so that a long press on the chosen key
will directly call him (e.g. long press on
2
to call your home or on
3
to
call your office).
L
You can only program keys
2
to
9
, as keys
0
(selection of the
language) and
1
(voice mailbox) are predefined and cannot be changed.
1 To set a hotkey for flash dial, press
,
to enter the main menu, then select
Settings > Hotkeys and press
,
.
2 Select a key "Not in use" from
2
to
9
and press
,
.
3 Then select Flash Dial , press
,
and select a name in the Phonebook
displayed. Press
,
to confirm your choice.
4 In idle mode, press and hold the programmed key to dial the associated
entry: the connection is established. Press
)
to hang up.
L
You can also set hotkeys for commands (see “Hotkeys” page 33). Hotkeys can
be changed or deleted at any time.
Voice dial
Voice dial also allows you to quickly call a name from your phonebook: instead
of programming a hotkey, you simply set a voice command by recording a word
that will call the corresponding name when pronounced.
1 To set a voice tag for voice dial, press
-
when in idle mode, select the
name of your choice in the list and press
,
.
2 Depending on the selected phonebook (see “Phonebooks” page 40):
- SIM phonebook: press
,
, select Voice dial and press
,
,
- phonebook in phone: select Show and press
,
, then select the
phone number of your choice if several numbers were stored for
this name and press
,
. Then select Voice dial in the carousel menu,
and press
,
.
3 When the option Add voice tag? appears, press
,
, then follow the
instructions displayed on the screen. When prompted to record your
voice tag, make sure you are in a quiet environment, choose a short and
simple word and clearly pronounce it.
Flash dial
Voice Dial
Fisio625_GB_4311 255 53832.book Page 17 Vendredi, 25. octobre 2002 6:10 18