Planet Technology WAP-1963 - Manual (Page 11)

7
Channel 1-13 (Europe)
Associated Clients Click “Show Active Clients” button, then a “Active Wireless Client Table” will pop up
as below. You can see the status of all active wireless stations that are connecting
to the access point.
“Active Wireless Client Table” records the status of all active wireless stations that are connecting to
the access point. You can lookup the MAC Address, Number of Transmitted Packets, Number of
Received Packets and Encryption Status of each active wireless client in this table.
Parameters Description
MAC Address MAC address of this active wireless station.
Tx Packet The number of transmitted packets that are sent out from this active wireless
station.
Rx Packet The number of received packets that are received by this active wireless station.
TX Rate The transmission rate in Mbps.
Power Saving Shows if the wireless client is in Power Saving mode.
Expired Time The time in second before dissociation. If the wireless keeps idle long than the
expired time, this access point will dissociate it. The wireless client station has to
associate again when it become active.
Refresh Refresh the “Active Wireless Client Table”.
Close Close “Active Wireless Client Table” window.