Connections, About midi connectors, Connecting microphone and headphones – Pioneer DJM-700-S User Manual
Page 8: Connecting the power cord, Microphone, Headphones, Connect the power cord last
CONNECTIONS
8
En
ABOUT MIDI CONNECTORS
See P. 21 regarding the functions of MIDI connectors.
CONNECTING MICROPHONE AND HEADPHONES
Microphone
A microphone with XLR-type plug can be connected to the
MIC 1
connector on the Operation Panel (upper) .
The
MIC 2
jack on the connection panel can be used to connect a
microphone with Ø6.3 mm phone plugs.
• When using a microphone, set the operating panel’s
MIC
switch
to [
ON
] or [
TALK OVER
], and adjust the
LEVEL
dial as
necessary.
When not using a microphone, it is recommended to set the
MIC
switch to [
OFF
] and rotate the
LEVEL
dial fully
counterclockwise to the [–
∞
] side.
Headphones
The
PHONES
jack on the upper surface of the operating panel can
be used to connect headphones with a Ø6.3 mm stereo phone
plug.
CONNECTING THE POWER CORD
Connect the power cord last.
• After completing all other connections, connect the power plug to an ordinary AC outlet.
MIC 2
MIDI OUT
d
OV
1
7
4
2
1
0
–
–
–
–
–
–
–
–
FADER START
MIC1
MIC1 LEVEL
0
MIC2 LEVEL
0
HI
MIC
CH-1
CH-2
OFF ON
TALK
OVER
+12
-12
LOW
+12
-12
EQ
Microphone 1
Microphone 2
HEADPHONES
LEVEL
0
MIXING
MASTER
CUE
MONO SPLIT STEREO
PHONES
Headphones
01_DJM-700_En.book 8 ページ ２００７年７月１０日 火曜日 午後８時５１分