Philips FlexCare HX6942 - Manual (Page 10)

Cord wrap on sanitiser (specific types only)
If your model includes the sanitiser, you can store excess cord with the
cord-wrap feature built into the bottom of the sanitiser.
Sanitising (specific types only)
With the sanitiser, you can clean your brush head after every use.
Discontinue use of the sanitiser if the UV light bulb remains on when the
door is open or if the Philips logo is broken or missing from the sanitiser.
UV light can be harmful to the human eye and skin. Keep the sanitiser
out of the reach of children at all times.
Unplug the sanitiser and call Customer Service if the sanitiser gives off
smoke or a burning smell while it is operating.
1 After brushing, rinse the brush head and shake off excess water.
Do not place the travel cap on the brush head during sanitisation.
To open the sanitiser door, press the door release button.
3 Place the brush head on one of the pegs in the sanitiser.
Make sure the bristles of the brush head directly face the light bulb.
Note: Only clean Sonicare ProResults brush heads in the sanitiser.
4 Make sure the sanitiser is plugged into wall socket.
Close the door and press the green power on/off button once to
select the UV clean cycle.
Note: You can only switch on the sanitiser when the door is properly closed.
Note: If you open the door during the sanitising cycle, the sanitiser stops.
Note: The sanitiser cycle runs for 10 minutes and then automatically switches
off.
The sanitiser is in operation when the blue light glows through the
Philips logo and the UV clean LED flashes slowly.
When the sanitising cycle is complete, the UV clean LED lights up
green continuously and the sanitiser automatically switches off.
-
-
-
,
,
EnglisH
10